http://WWW.KUMARENGINEERINGCO.IN
ZEDCONTROLSYSTEM 59a50c73705a35069cf6d3d5 False 2 8
OK
background image not found
Products
https://productimages.withfloats.com/tile/5c7025c1f76be800014bc71a.jpg
Automatic Edge Cutting Machine (DD Saw) INR 0 INR 0
view details
5c7025c1811f09000126e9dd
-NaN%

Automatic Edge Cutting Machine (DD Saw)

Model No. : ZEDSAW 2490 HS Automatic Edge Cutting Machine, or DD Saw, is another venture of our company in the pursuit of the goal of technical innovation. Being an entirely automatic machine, it is fully capable to bring down time, energy and manpower exponentially. Working features of this machine are as follows - 1) Plywood is to be loaded only at the input side. It will further be carried away to the output side through dynamic design and hi-tech automation. 2) The plywood is tightly held through pneumatic clamps. 3) Longitudinal table carries the plywood through extra-high-speed cutter, having 9000 RPM speed, built exclusively by Kumar Engineering Co. 4) After cutting it width-wise, the plywood is moved to the right angle of its initial motion, and then, high speed length-wise cutting starts. 5) Finally, the bunch of sheets is auto stacked on the scissor lift.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5c70255916b77f0001af8002.jpg
Single Head Calibrating Machine INR 0 INR 0
view details
5c702559811f09000126e9d5
-NaN%

Single Head Calibrating Machine

Model No. : ZEDSAN CAL 290 Single Head Calibrating Machine is developed to produce the uniform thickness ply, with possibly the lowest thickness variation in between 0.05 to 0.15 mm. We, as an innovating company in this field, created an ultimate design in Calibrating Machine with combinations of unique features, such as - 1) Highly Accurate Calibration 2) Good Speed of Production 3) Lowest Electricity Consumption 4) High No. of Sheet Output per Sanding Belt 5) User Friendly in Maintenance 6) Smooth Production

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5c70220e5d588900013383d0.jpg
Heavy Duty Laminate Sanding Machine INR 0 INR 0
view details
5b6b35d8ca0d50054361660c
-NaN%

Heavy Duty Laminate Sanding Machine

Model No. : ZEDLAM 350 HD The Heavy Duty Laminate Sanding Machine covers all features as Light Duty Machine, with an additional advantage of higher capacity of main motor to carry high sanding load to achieve higher production. All settings and adjustments are designed for the best user friendly concept.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5c7021fa95da19000110eb48.jpg
Double Head Both Side Brushing Machine INR 0 INR 0
view details
5b6b35d8ca0d500543616592
-NaN%

Double Head Both Side Brushing Machine

Model No. : ZEDSWEEP BM This Machine is used for sanding after dipping. Designed with two pairs of Abrasive Brushes with different grits, for creating coarse sanding through first pair of brushes, and fine-sanding through second pair of brushes. This is featured with both side sanding in one pass, displaying Ampere consumed by individual brush. Thickness adjustment is carried out by all corner mounting Jacks and Digital Display of Ply Thickness. The Brushing Machine is fully capable to deliver the ultimate sanding results without any color fading.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5c7022d317d2ac0001950aae.jpg
Double Head Wide Belt Sanding Machine - TOP INR 0 INR 0
view details
5b6b35d8ca0d50054361651d
-NaN%

Double Head Wide Belt Sanding Machine - TOP

Model No. : ZEDSAN 4126 DS This Model is the best Sanding Machine for almost every Plywood Industry, as excellent sanding results are achieved with latest technology and are assured with "NO SANDING OFF". Specific features of this machine are - 1) Perfect Sanding on Uneven Thickness 2) Highly Glossy Sanding Results 3) Fast production 4) Changeable Results by easy configurations setting. It is useful for - A. Commercial Sanding B. Veneer Sanding C. MR Sanding D. Veneer Faced Flush Doors

INR 0 INR 0

Availability:False

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5c7022f65d588900013383e2.jpg
Double Head Wide Belt Sanding Machine - BOTTOM INR 0 INR 0
view details
5b6b35d8ca0d5005436164a5
-NaN%

Double Head Wide Belt Sanding Machine - BOTTOM

Model No. : ZEDSAN 4126 BS This Model was developed because, after top-surface sanding, there was a time, energy and manpower loss in rotating the ply for bottom-surface sanding through Top Sander. Therefore, by using this model of Sanding Machine, The plywood, after passing through Top Sander, enters directly into it via a Conveyor Table. With this machine, Only one operator can handle Both-Side Sanding in one go. This Machine has following features - 1) Used in synchronization with Top Sanding Machine 2) Perfect Sanding Results on Uneven Thickness 3) Highly Glossy Sanding Results, as in Top Sanding Machine 4) Fast production, as Both Side Sanding is achieved in one pass 5) Changeable Results, by easy configuration settings. Very useful for - A. Production Units with more than 3000 Sheets per day production. B. Commercial Sanding C. Veneer Sanding D. MR Sanding E. Veneer Faced Flush Doors

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5c7023565762e60001b63240.jpg
Hardwood Calibrating and Sanding Machine INR 0 INR 0
view details
5b6b35d8ca0d50054361640d
-NaN%

Hardwood Calibrating and Sanding Machine

Model No. : ZEDWOOD 1050 CS This Machine is introduced for hardwood and furniture producing Industries. The Machine provides uniform wood thickness and high shining in one pass. The Cutter Roller brings all thickness variations in one set value by applying minimum quantum of power. Sanding Belt application on second head converts the job into a unique look.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
https://productimages.withfloats.com/tile/5c7022227c0bd40001ca32df.jpg
Triple Head Calibrating and Sanding Machine INR 0 INR 0
view details
5b6b35d8ca0d500543616388
-NaN%

Triple Head Calibrating and Sanding Machine

Model No. : ZEDSAN 5326 TCS Triple Head Sanding Machine is developed by combining the application of Calibration and Sanding in a single machine, especially for those Plywood Units which have 2 to 4 Presses, and have plan to make 100% calibrated ply or have the plan for partial production of Calibrated Ply. Three Heads of this machine are designed in such a way that the first head is used for Calibration, second head for Sanding and third head for Polishing. While Calibration, 1st Head is operational, and while Sanding, the second and third head is operational. This machine is a complete solution for making Calibrated Ply with ultimate sanding results.

INR 0 INR 0

Availability:True

Pay mode:COD only

view details
1
false